Lenovo Erazer X700Hardware Maintenance Manual - X700 Desktop - Page 50

Sponsored links

Step 12. Remove the 2 screws that secure the front I/O board to the bracket, and then slide the front
I/O board out as shown.
9
Step 13. Install the new front card reader module:
a.
Line up the new front I/O board with the bracket, then secure the front I/O board to the
bracket with the 2 screws.
b.
Slide the new front I/O board module and cables into position.
c.
Secure the new front I/O board to the chassis with the 2 screws.
d.
Reattach the top cover.
e.
Reattach the power supply, heat-sink, graphic card.
Step 14. Reattach the computer cover.
FRU lists
This chapter lists the information on the field replaceable units (FRUs).
Attention:
Be sure to read and understand all the safety information before replacing any FRUs.
Notes:
FRUs that have a 1 or 2 in the CRU column are Customer Replaceable Units (CRUs).
1
– identifies parts that are fairly simple to replace, requiring few or no tools.
2
– identifies parts that are slightly more difficult to replace.
N
-identifies parts that are not to be replaced by the customer.
Description
Service
part
number
(FRU)
CRU ID
Processor
44
Lenovo Erazer X700Hardware Maintenance Manual

Sponsored links