Samsung Db400s7b User Manual (windows 7) English (22.77 MB)

DB400S7B Language

Download Samsung Db400s7b User Manual (windows 7) English (22.77 MB)

Sponsored links


Download Request Is In Process

400T7A/400S7A - Page 1

400T7A/400S7A 400T7B/400S7B User Manual

..

Contents - Page 2

2 Contents Chapter 1. Getting Started 4 Before You Start 7 Safety Precautions 14 Ergonomic tips 18 Package Contents 20 Overview 24 Installing the Computer 29 Turning the Computer On and Off Chapter 2. Using the computer 32 Keyboard 33 Mouse 35 CD Drive (ODD, Optional) 37 Memory Card Slot (Optional) 40 Connecting an External Display Device 47 Connecting Speakers 49 Adjusting the Volume 50 Wired Network 53 Samsung Update Chapter 3. Settings and Upgrade 55 BIOS Setup 58 Setting a Boot Password 62 Changing the Boot Priority 63 Disassembling the computer 68 Interior computer components 69 Main ..

Chapter 1. - Page 3

Before You Start 4 Safety Precautions 7 Ergonomic tips 14 Package Contents 18 Overview 20 Installing the Computer 24 Turning the Computer On and Off 29 Chapter 1. Getting Started

..

Using the software - Page 4

4 Chapter 1. Getting Started Before You Start Before reading the User Manual, first check the following information. Optional items, some devices and software referred to in • the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. The pictures used for the cover and the main body in the • User Manual are those of the representative model of each series and may differ from the actual appearance of the product. This guide describes procedures for using both the mouse • and..

Before You Start - Page 5

5 Chapter 1. Getting Started Before You Start Safety Precaution Notations Icon Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. Text Notations Icon Notation Description Caution Content included in this section includes information required about the function. Note Content included in this section includes helpful information to use the function. Copyright © 2017 Samsung Electronics Co., Lt..

About the capacity representation of the storage - Page 6

6 Chapter 1. Getting Started Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB, 80x1,000x1,000x1,..

Handle the power cord with care. - Page 7

7 Chapter 1. Getting Started Safety Precautions For your safety and security and to prevent damage, carefully read the following safety instructions. This ’Safety precautions’ relate to computer use. Some of the content may be not applicable to your computer. Since this is commonly applied to Samsung Computers, • some pictures may differ from actual products. The product mentioned in this guide refers to all items • supplied with the computer including the battery, the AC adapter, and all other Samsung-provided accessories. Warning Failure to follow the instructions marked with thi..

Battery usage related - Page 8

8 Chapter 1. Getting Started Safety Precautions Use only properly earthed electric sockets or extension cords. Unearthed electric sockets or extension cords may cause electric shock. Any connection to unearthed electric sockets or extension cords may produce an electric field from a current leak. If water or other substances enters the product, disconnect the power cable and contact a Samsung Service Center. Failure to do so may result in electric shock or fire due to the malfunction of the inner part. Do not let dust accumulate on the power cord or the electric socket. Regularly wipe the..

Safety Precautions - Page 9

9 Chapter 1. Getting Started Dispose of worn-out batteries properly. There is a danger of fire or explosion. • The battery disposal method may differ depending on • your country and region. Dispose of the used battery in an appropriate way. When removing the real time clock (RTC) battery, keep it away from infants and children. If a child swallows the battery, the child may suffocate. If this happens, immediately contact a doctor. Usage related Do not use the computer on heated floors or electric pads, or on beds, blankets, or cushions that block the ventilation of the computer. A b..

Installation related - Page 10

10 Chapter 1. Getting Started Caution Failure to follow instructions marked with this symbol may result in minor physical injury or damage to the computer. Installation related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire. When using the computer on its side, ensure the vents are clear and facing upwards. Failure to do so, may cause the internal temperature of the computer to rise and the computer to malfunction or halt. Keep the computer’s vents at least 15 cm away from wa..

Safety Precautions - Page 11

11 Chapter 1. Getting Started Safety Precautions Connect only permitted devices to the connectors or ports of the computer. Failure to do so may result in an electric shock or fire. Do not press the eject button while the CD-ROM drive is in operation. You might lose data and the disc might be suddenly ejected and could cause an injury. Do not drop or hit the computer against anything. Failure to do so may result in physical injury or computer malfunction. Do not allow the antenna and a source of electricity, such as a socket outlet, to come into contact. There is a danger of electric shock..

Safety Precautions - Page 12

12 Chapter 1. Getting Started Safety Precautions Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. The airport security devices that check carry-on luggage, such as conveyor belts, use X-rays instead of magnetism and will not damage a drive. Keep the computer away from magnetic material. Magnetic materials may cause computer malfunction. • To avoid damaging the computer or magnetic stripe cards, • such as credit cards, keep magnetic stripe cards away from the computer. Do not use your computer in a..

Cautions on preventing data loss (hard disk management) - Page 13

13 Chapter 1. Getting Started Safety Precautions Never disassemble or repair the product by yourself. There is a danger of accident. Use authorized Samsung Service Center. To connect a device that is not manufactured or authorized by Samsung, enquire at a Samsung Service Center before connecting the device. There is a danger of damaging the product. Storage and movement related Do not operate or look at the computer while driving a vehicle. There is a danger of a traffic accident. Please concentrate on driving. Cautions on preventing data loss (hard disk management) Take care not to damage ..

Ergonomic tips - Page 14

14 Chapter 1. Getting Started Ergonomic tips Maintaining the proper posture during computer use is very important to prevent physical injury. Improper or prolonged keyboard use may result in repetitive strain injury. Viewing the monitor screen for extended periods of time may result in eye strain. Therefore, please follow these guidelines carefully when setting up and using the computer. Back and neck Use an adjustable chair with firm, comfortable support. • Adjust the height of your chair so that thighs are horizontal to • the floor and feet are flat on the floor. The back of the c..

Ergonomic tips - Page 15

15 Chapter 1. Getting Started Ergonomic tips Arms and hands When using the keyboard and touchpad, the shoulders should • be relaxed. The upper arm and forearm should form an angle that is slightly greater than a right angle, with the wrist and hand in almost a straight line. Use a light touch when typing or using the touchpad and keep • the hands and fingers relaxed. Avoid rolling the thumbs under your palms or supporting the wrists on the desk while typing. Use an external keyboard and mouse when using the • computer for long periods. When using an external keyboard and mouse, posit..

Eye position and display illumination - Page 16

16 Chapter 1. Getting Started Ergonomic tips Eye position and display illumination 50 cm Position the screen at least 50 cm away from your eyes. • Adjust the height of the screen so that its top edge is equal to • or just below the level of your eyes. Avoid setting the screen’s brightness settings excessively high. • Keep the screen clean. • If wearing glasses, clean them before using the computer. • When referring to printed content while typing, use a static • paper holder to hold the paper at about the same height as the monitor. Hearing and volume control VOLUME Check your..

Use caution when exposed to flashing lights. - Page 17

17 Chapter 1. Getting Started Ergonomic tips Operating conditions Take at least a 10 minute break every hour. • Avoid using the computer in dark locations. Use the computer • with as much ambient light as you would when reading a book. Indirect illumination is recommended. Use a curtain to prevent • reflections and glare on the screen. While operating a computer and talking on the phone, use a • headset. Using the computer while holding a phone on your shoulder or with your neck may lead to muscle strain or injury. Keep frequently used items within reach. • Only use the computer ..

Contents of 400T7A/400T7B - Page 18

18 Chapter 1. Getting Started The appearance and color of the keyboard and mouse may differ depending on your computer model. • The appearance of the power cord may differ from country to country. • The appearance and package contents of the computer may differ depending on your computer model. • Contents of 400T7A/400T7B Computer Power Cord Keyboard Mouse Package Contents

..

Contents of 400S7A/400S7B - Page 19

19 Chapter 1. Getting Started The appearance and color of the keyboard and mouse may differ depending on your computer model. • The appearance of the power cord may differ from country to country. • The appearance and package contents of the computer may differ depending on your computer model. • Contents of 400S7A/400S7B Computer Power Cord Keyboard Mouse Package Contents

..

Front View of 400T7A/400T7B - Page 20

20 Chapter 1. Getting Started Overview The appearance and color of the computer may differ depending on your model. • Some options may not be available or may differ depending on your model. • Front View of 400T7A/400T7B CD Drive (ODD, Optional) This drive allows you to read CDs or DVDs. Power button and status light Turns the computer on/off and indicates the operating status of the computer via the border color. ● Blue: Computer is turned on. ● Amber: Power saving mode CD Drive (ODD, Optional) or CD Drive expansion space (Optional) Headphone Jack You can connect headphones here..

Rear View of 400T7A/400T7B - Page 21

21 Chapter 1. Getting Started Overview The appearance and color of the computer may differ depending on your model. • Some options may not be available or may differ depending on your model. • If an external graphics card is installed, change the settings in the BIOS first to use the internal HDMI port, RGB port, or DVI port. Turn on the computer • and press the F2 key to enter BIOS mode. Select Advanced > Graphics > IGD multi monitor and change Disable to Enable . The location and type of the port may differ depending on the graphics card. • If an additional graphics card..

Front View of 400S7A/400S7B - Page 22

22 Chapter 1. Getting Started CD Drive (ODD, Optional) This drive allows you to read CDs or DVDs. Power button and status light Turns the computer on/off and indicates the operating status of the computer via the border color. ● Blue: Computer is turned on. ● Amber: Power saving mode Headphone Jack You can connect headphones here. Memory Card Slot (Optional) A card slot supports memory cards. Chargeable USB 3.0 ports The chargeable USB ports can be used to connect and charge USB devices. Overview Front View of 400S7A/400S7B The appearance and color of the computer may differ depending..

Rear View of 400S7A/400S7B - Page 23

23 Chapter 1. Getting Started Overview Rear View of 400S7A/400S7B The appearance and color of the computer may differ depending on your model. • Some options may not be available or may differ depending on your model. • If an external graphics card is installed, change the settings in the BIOS first to use the internal HDMI port, RGB port, or DVI port. Turn on the computer • and press the F2 key to enter BIOS mode. Select Advanced > Graphics > IGD multi monitor and change Disable to Enable . The location and type of the port may differ depending on the graphics card. • If ..

Connecting the Keyboard and the Mouse - Page 24

24 Chapter 1. Getting Started Installing the Computer Be sure to turn the computer and peripheral devices off and then start installing the computer. The appearance and package contents of the computer may differ depending on your computer model. The devices not included in the package contents are optional. Connecting the Keyboard and the Mouse Connect the keyboard and the mouse to corresponding ports. The keyboard and the mouse may vary depending on the model. When the mouse supporting USB 2.0 is connected to the USB 3.0 port, it operates with the USB 2.0 speed. PS/2 Port (for PS/2-comp..

When Using the Internal Graphics Card (Optional) - Page 25

25 Chapter 1. Getting Started Installing the Computer Connecting the Monitor/TV When Using the Internal Graphics Card (Optional) Connect to the RGB Port or HDMI Port. 400T7A/400T7B • RGB Port DVI Port HDMI Port 400S7A/400S7B • RGB Port DVI Port HDMI Port The location and type of the port may differ depending on the graphics card.

..

When Using the External Graphics Card (Optional) - Page 26

26 Chapter 1. Getting Started When Using the External Graphics Card (Optional) Connect to the RGB Port, HDMI Port, or DVI Port. 400T7A/400T7B • DVI Port RGB Port HDMI Port Installing the Computer 400S7A/400S7B • DVI Port RGB Port HDMI Port The location and type of the port may differ depending on the graphics card. • When using the graphics card, connect external display devices to the external graphics card ports. •

..

Connecting the Speaker and the LAN Cable - Page 27

27 Chapter 1. Getting Started Installing the Computer Connecting the Speaker and the LAN Cable Connect the speaker and the LAN cable to corresponding ports. 400T7A/400T7B • Connect the LAN cable Connect the Speaker 400S7A/400S7B • Connect the LAN cable Connect the Speaker

..

Plug the power cord into the AC-IN port of the computer. - Page 28

28 Chapter 1. Getting Started Installing the Computer Connecting the Power Cord Plug the power cord into the AC-IN port of the computer. 400T7A/400T7B • AC-IN Port 400S7A/400S7B • AC-IN Port

..

Turning the Computer On and Off - Page 29

29 Chapter 1. Getting Started Turning the computer on 1 When all connections are made, turn the monitor and the peripheral devices on first. 2 Press the Power button to turn the computer on. [400T7A/400T7B] [400S7A/400S7B] Power Button When you turn the computer on for the first time, the Windows activation screen appears. You must register your Windows information to use the computer. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the com..

Turning the Computer On and Off - Page 30

30 Chapter 1. Getting Started Turning the computer off Since the procedures to turn the computer off may differ • depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. Save all your data before clicking on • Shut down . If • Easy Settings is installed, the system shutdown location may differ. Click  Start >  Shut down to shutdown the computer.     or Turning the Computer On and Off

..

Chapter 2. - Page 31

Keyboard 32 Mouse 33 CD Drive (ODD, Optional) 35 Memory Card Slot (Optional) 37 Connecting an External Display Device 40 Connecting Speakers 47 Adjusting the Volume 49 Wired Network 50 Samsung Update 53 Chapter 2. Using the computer

..

Chapter 2. - Page 32

32 Chapter 2. Using the computer Keyboard The appearance and color of the keyboard may differ with the model. Windows keys You can open the Windows Start Menu. Application key This works as the right mouse button. Directional keys You can move the cursor up/down/left/ right. Number keys If you press the Num Lock key, the Num Lock indicator lights up, and you can use the number keys. Additional keys You can delete/enter/edit text or move the cursor up or down the page or to the beginning or end of a line. Indicators These indicate whether Num Lock, Caps Lock or Scroll Lock are on. Function ..

Click function - Page 33

33 Chapter 2. Using the computer Mouse A mouse is a user interface that enables users to move the cursor and pointer on the screen. The appearance and color of the mouse may differ depending on your computer model. Wheel button Moves the pointer up and down. Left button Selects and launches an item. Right button Shows the context- sensitive menus of programs. If you move the mouse, the pointer on the screen moves in the same direction. Click function Briefly press the left mouse button once. If you click this mouse button once, the corresponding program is selected. Double-click function ..

Right click function - Page 34

34 Chapter 2. Using the computer Mouse Right click function If you right-click on the mouse once, the context-sensitive menu of the current program appears. Drag function Dragging refers to clicking an item and moving the item to another position while holding the mouse button down. Click the left mouse button over an item to be dragged and move the item to the new position while holding the mouse button down. Scroll Function Turn the wheel upwards or downwards and the screen is scrolled up or down accordingly.

..

Inserting and Ejecting a CD (400T7A/400T7B) - Page 35

35 Chapter 2. Using the computer CD Drive (ODD, Optional) A CD drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. Do not insert a cracked or scratched CD. • Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. When you clean a CD or DVD title, wipe with a soft cloth • from inside to outside. Do not remove a CD when the CD drive LED is on. • Do not touch the bottom side of a CD with your finger. • If any substance is added to the bottom of a CD, the CD will not read p..

Do not insert small discs such as 80mm CDs into the - Page 36

36 Chapter 2. Using the computer CD Drive (ODD, Optional) Inserting and Ejecting a CD (400S7A/400S7B) 1 Press the Eject button for the optical disk drive to open the CD tray. Eject button 2 When the CD tray opens, place a CD or DVD in the tray so that the printed side of the disk faces outwards. 3 When you press the Eject button again, the CD tray will close. Do not insert small discs such as 80mm CDs into the computer when the computer is vertical. To use small discs, place the computer on its side.

..

Memory Card Slot - Page 37

37 Chapter 2. Using the computer Memory Card Slot (Optional) Use a memory card as a removable storage device and transfer data to other digital devices, such as digital cameras. Purchase a memory card with the necessary capacity for the requirement. This computer supports the following types of memory cards. Abbreviation Description SD Secure Digital mini SD mini Secure Digital micro SD micro Secure Digital SDHC Secure Digital High Capacity mini SDHC mini Secure Digital High Capacity micro SDHC micro Secure Digital High Capacity SDXC Secure Digital eXtended Capacity micro SDXC micro Secure ..

Open folder to view files - Page 38

38 Chapter 2. Using the computer Memory Card Slot (Optional) Inserting a memory card 1 If a dummy card or a memory card adapter is inserted in the memory card slot, remove it. 2 Insert a memory card into the memory card slot in the indicated direction. Memory Card Slot SD, mini SD, SDHC, mini SDHC, SDHC UHS-I, SDXC, SDXC UHS-I Micro Memory Card Slot micro SD (T-Flash), micro SDHC, micro SDXC, micro SDXC UHS-I xD Slot xD CF Slot CF I, CF II, MD MS Slot MS, MS Duo, MS-Pro, MS-Pro Duo, MS Micro (M2), MS-Pro HG (Compatible), MSXC (Compatible) For the 400S7A/400S7B models, insert the memory card..

Formatting a memory card - Page 39

39 Chapter 2. Using the computer Formatting a memory card Format the memory card to remove all data or before using it for the first time. Formatting a memory card deletes all data saved on the card. If necessary, back up important data before formatting the card. 1 Click Start > Computer . 2 Right-click the memory card drive, and then select Format . 3 Click Start . Format will start. To use a memory card to exchange data with a digital • device, such as a digital camera, formatting the data with the digital device is recommended. When trying to use a formatted memory card in another..

When Using the External Graphics Card (Optional) - Page 40

40 Chapter 2. Using the computer Connecting an External Display Device Connecting the computer to an external display device can be useful for presentations or when watching a movie. Check the available ports and cables on the display device • to ensure that it is compatible with the computer. The location of the port may differ depending on the • graphics card. Video Output Port The visual quality is sharper when a display device is connected through the HDMI/DVI port rather than the analog monitor port (RGB) port. Therefore, when multiple ports are supported, connect a display device..

Connecting an External Display Device - Page 41

41 Chapter 2. Using the computer About the connection cable Users should additionally purchase the necessary connection cables. RGB Cable A cable used to connect to a RGB port. DVI Cable A cable used to connect to a DVI port. HDMI Cable A cable used to connect to a HDMI port. Connecting an External Display Device

..

When Using the External Graphics Card (Optional) - Page 42

42 Chapter 2. Using the computer Connecting an External Display Device Connecting an external display device When Using the External Graphics Card (Optional) When using the external graphics card, connect external display devices to the external graphics card ports. Connect an external display device to the DVI, HDMI, RGB port and select External IN on the external display device. [400T7A/400T7B] • RGB DVI HDMI [400S7A/400S7B] • RGB DVI HDMI The location and type of the port may differ depending on • the graphics card. To listen to sound through the external display device’s • sp..

Setting up the screen when two devices are connected - Page 43

43 Chapter 2. Using the computer Connecting an External Display Device Setting up the screen when two devices are connected 1 Connect the power cable to the connected monitor, TV, or projector, and turn on the power. 2 When you press the Windows key + P P , the screen with monitor mode options will appear. Select the mode you want to use. PC screen only Show the screen on the computer monitor only. Duplicate Show the screen on both the computer and the external display. Extend Extend the screen to the external display. Second screen only Show the screen on the external display only.

..

Connecting an External Display Device - Page 44

44 Chapter 2. Using the computer Setting up HDMI TV (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. Setting up HDMI TV screen If the Desktop screen displayed on the TV does not fit to the TV screen, configure it as follows depending on the graphics card. You can view the graphics card type by selecting • Device Manager > Display adapters and then clicking the symbol. The screen images and terms may differ from actual • ..

Connecting an External Display Device - Page 45

45 Chapter 2. Using the computer ► For Intel graphics cards 1 Right-click over the Desktop and click Graphics Properties . If a window appears where you can select the mode, select Basic Mode and click OK . 2 Click Display > General Settings , select Customize Aspect Ratio in the Scaling field, fit the Desktop to the TV screen and click OK . Setting up HDMI TV audio You can configure the sound of the computer to be played through the HDMI TV. You have to configure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the ..

Connecting an External Display Device - Page 46

46 Chapter 2. Using the computer 2 Change the setting to HDMI Output (or HDMI device ) if Speakers is selected as the playback device, click Set Default and click OK . Connecting an External Display Device

..

Since the speaker ports at the back are for amplifying a - Page 47

47 Chapter 2. Using the computer Connecting Speakers For this computer, audio ports are provided at the front and back. You can connect 5.1 channel analog speakers to the ports at the back. Since the speaker ports at the back are for amplifying a speaker system, the output of these ports may differ from the ports at the front. Audio Ports ► Front Audio Ports [400S7A/400S7B] Connect the headphones [400T7A/400T7B] Connect the headphones ► Rear Audio Ports IN Used to connect the analog sound input device and the rear speakers OUT Used to connect the left and right front speakers MIC Used ..

Connecting 5.1 Channel Speakers - Page 48

48 Chapter 2. Using the computer Connecting Speakers Connecting Analog Speakers You can connect up to 6 speakers to the audio jacks on the rear panel of the computer for 5.1 channel sound. For one jack, you can connect two speakers (right and left). Refer to the steps below to correctly connect your speakers. ► Connecting 5.1 Channel Speakers 1 Connect the left and right front speaker jack to OUT of the rear sound port. 2 Connect the rear speaker jack to IN of the rear sound port. 3 Connect the center/sub-woofer speaker jack to MIC of the rear sound port. 4 Double-click the icon in the sy..

Adjusting the Volume using the Volume - Page 49

49 Chapter 2. Using the computer Adjusting the Volume You can adjust the volume using the keyboard and the volume control program. The Volume icon appears on the taskbar when speakers or headphones are connected to the computer. Adjusting the Volume using the Volume Adjustment Program Click the Volume icon on the taskbar and slide the volume control bar to adjust the volume. Mute Right-click the Volume icon in the taskbar to open the volume mixer (M) to adjust the equipment volume or the volume of Applications. If you adjusted the volume, but no sound was output Right-click the Volume icon ..

Connecting to a Wired LAN through Windows - Page 50

50 Chapter 2. Using the computer Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. The figures used for the description are of a representative model. Therefore the figures may differ from the real ones. Connecting to a Wired LAN through Windows 1 Connect the LAN cable to the wired LAN port. 2 Click Start > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. 3 Select Local Area Connection and click the right button of the mouse and s..

Wired Network - Page 51

51 Chapter 2. Using the computer 4 Select Internet Protocol Version 4 (TCP/IPv4) from the list of Network Components and click Properties . The Network Component name may differ depending on • the Operating System Installed. To add a network component, click • Install in the screen shown in the figure above. You can add clients, services, and protocols. 5 Configure the IP settings. When using DHCP, select Obtain an IP address automatically . To use a static IP address, select Use the following IP address , and set the IP address manually. When not using the IP address automatically, ..

Using the <Wake On LAN> Function - Page 52

52 Chapter 2. Using the computer Wired Network Using the <Wake On LAN> Function <Wake On LAN> is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). However, this function is not supported when the system is shut down. 1 Click Start > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. 2 Right-click on the Local Area Connection and select Properties . 3 Click Configure > Power Management tab. Select A..

Samsung Update - Page 53

53 Chapter 2. Using the computer Samsung Update Use Samsung Update to install and update Samsung applications and drivers on the computer easily and conveniently. This application enables the user to search for or download the BIOS, drivers, and applications over the Internet. Keep the computer performing better and more stably with Samsung Update . To check for available updates, the computer must be • connected to the Internet. Only applications that have been installed with this • application can be updated. Images and features may differ depending on the model • and the applicati..

Chapter 3. - Page 54

BIOS Setup 55 Setting a Boot Password 58 Changing the Boot Priority 62 Disassembling the computer 63 Interior computer components 68 Main board structure 69 Adding cards 70 Adding memory 74 Adding the hard drive (HDD) 75 Exchanging the CD drive (ODD) 80 Exchanging the CPU 84 Exchanging the CMOS battery 86 Chapter 3. Settings and Upgrade

..

Entering the BIOS Setup - Page 55

55 Chapter 3. Settings and Upgrade BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. Use the BIOS setup to define a boot password, change the • booting priority, or add a new device. Since incorrect settings may cause your system to • malfunction or crash, take care when configuring the BIOS. The functions of the BIOS setup are subject to change for • product function enhancement purposes. The BIOS Setup menus and items may differ depending on • your computer model. Entering the BIOS Setup 1 Turn the computer on. 2 Immediately pre..

$GYDQFHG#########6HFXULW\#########%RRW##########([LW - Page 56

56 Chapter 3. Settings and Upgrade The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. Setup Menu Help Help for the selected item appears automatically. Setup Items ##%,26#6HWXS 6\V,QIR######### $GYDQFHG#########6HFXULW\#########%RRW##########([LW %,26#9HUVLRQ &38#7\SH &38#6SHHG &38#&RUH 7RWDO#0HPRU\ 0HPRU\#6SHHG 0HPRU\#0RGH /DQJXDJH 6\VWHP#7LPH 6\VWHP#'DWH 'LVN#0HQX ;;;; ;;;; ;;;; ;;;; ;;;; ;;;; ;;;; >(QJOLVK@ >4:=<?=45@ >4ABACB5A4A@ ೛ 6HOHFW#WKH#FXUUHQW GHIDXOW#ODQJXDJH#XVHG E\#%,26 >)4@# +HOS >)<@# 3UHY..

In the Setup, you have to use the keyboard. - Page 57

57 Chapter 3. Settings and Upgrade System Setup Keys In the Setup, you have to use the keyboard. F1 Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 Press to change the item value. F9 Press to load the default Setup settings. ESC Press to return to a higher level menu or to move to the Exit menu. Left & Right Keys Press to move to another menu. Enter Press to select an item or to enter a sub menu. F10 Press to save the changes and exit Setup. The keyboard image may differ from the actual keyboard. BIOS Setup

..

Setting a Supervisor Password - Page 58

58 Chapter 3. Settings and Upgrade Setting a Boot Password If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. The password setting provides the following 3 sub menus. • (Supervisor Password, User Password and HDD Password) Do not lose or forget your password. • Do not let others know your password. • If you forget the Supervisor Password or HDD Password, • you will need to request assistance f..

Setting a Boot Password - Page 59

59 Chapter 3. Settings and Upgrade Setting a Boot Password 3 Enter a password, press < Enter >, re-enter the password for confirmation, and press < Enter > again. The password can be up to 20 alphanumeric characters. Special characters are not allowed. 4 The supervisor password has been set. The supervisor password is required to turn the computer on or to enter the BIOS Setup. For some models, if the password entered message appears in the Setup Notice window, the settings are not complete until the < Enter > key is pressed. Setting a User Password Using the User Passwor..

Setting up a Hard Disk Drive Password (Optional) - Page 60

60 Chapter 3. Settings and Upgrade Setting a Boot Password Setting up a Hard Disk Drive Password (Optional) If you set a password for a hard disk drive, it cannot be accessed from another computer. Press < Enter > in the Set HDD Password item and define a password as described in Step 3 of the Setting up the Supervisor Password. The hard disk drive password setting function is not • provided for some models. Changing the hard disk drive password • For security purposes, you can only change a hard disk drive password after restarting the computer by pressing the computer Power but..

If you have forgotten an administrator or user - Page 61

61 Chapter 3. Settings and Upgrade Setting a Boot Password If you have forgotten an administrator or user password You can cancel the password using the computer main board’s CMOS battery. If you have lost the hard drive password, you need support from a service center, and there is a separate charge for these services. 1 Turn off the computer and unplug the power cable from the computer. 2 Open the computer cover. 3 If the CMOS battery socket is Type A Press the latch holding in the CMOS battery and remove the battery, then reinsert after 1-2 minutes. If the CMOS battery socket is Type ..

Changing the Boot Priority - Page 62

62 Chapter 3. Settings and Upgrade Changing the Boot Priority Changing the Boot Priority 1 Select the Boot menu in the BIOS Setup. 2 Press < Enter > on the Boot Device Priority item. BIOS Setup SysInfo Advanced Security Boot Exit Select boot priority of boot devices. Fast Boot Booting By LAN Secure Boot OS Mode Selection Boot Device Priority [Disabled] [Disabled] [Disabled] [CSM OS] ሪ 3 Press < Enter > on the Boot Option #1 item. Select the drive to boot from. 4 Press the F10 key to save and exit the BIOS Setup. The boot priority will be changed.

..

(for 400T7A/400T7B models only) - Page 63

63 Chapter 3. Settings and Upgrade Disassembling the computer You must open the cover to replace or add computer parts. The computer's form and interior structure may differ depending on selected specifications. If you are not comfortable doing the expansion yourself, please contact a service center for support. However, expansion-related services are not free even during the free service period. The computer may be severely damaged by electrical • shock, so be sure to disconnect the power cable before disassembling. Be careful as parts may be damaged by even small amounts of static rea..

(for 400T7A/400T7B models only) - Page 64

64 Chapter 3. Settings and Upgrade 3 Lift the cover in the direction of the arrow. 4 To close the cover again, lift it as in picture  and then pull it forward to the end of the front cover in the direction of the arrow.  5 Turn the screws in the back of the computer to the right to tighten. Disassembling the computer (for 400T7A/400T7B models only)

..

(for 400T7A/400T7B models only) - Page 65

65 Chapter 3. Settings and Upgrade Removing the front cover You must remove the front cover to exchange the CD drive. 1 Remove the Power / LED cable connected to the main board. Power / LED cable 2 Pull the bottom two latches upward and push the top two latches to the center to remove the front cover. Latch The picture is for reference only. It is not necessary to detach the hard drive bracket. 3 When assembling the computer, insert the hook through the front cover of the computer, and push the cover until it clicks into place. Be careful not to damage the cables when assembling the front c..

(for 400S7A/400S7B models only) - Page 66

66 Chapter 3. Settings and Upgrade You must open the cover to replace or add computer parts. The computer’s form and interior structure may differ depending on selected specifications. If you are not comfortable doing the expansion yourself, please contact a service center for support. However, expansion-related services are not free even during the free service period. The computer may be severely damaged by electrical • shock, so be sure to disconnect the power cable before disassembling. Be careful as parts may be damaged by even small amounts of static reaching the computer. (elec..

(for 400S7A/400S7B models only) - Page 67

67 Chapter 3. Settings and Upgrade 3 Lift the cover in the direction of the arrow. 4 To close the cover again, lift it as in picture  and then pull it forward to the end of the front cover in the direction of the arrow.  5 Turn the screws in the back of the computer to the right to tighten. Disassembling the computer (for 400S7A/400S7B models only)

..

Interior computer components - Page 68

68 Chapter 3. Settings and Upgrade The computer's interior structure may differ depending on the model and selected specifications. • The installed cooling fan may differ by model. • Interior computer components [400S7A/400S7B] Power supply Expansion card slot CPU and cooling fan CD drive space Main board Hard drive space [400T7A/400T7B] Expansion card slot Main board Power supply CD drive or CD drive expansion space CPU and cooling fan Hard drive space

..

Main board structure - Page 69

69 Chapter 3. Settings and Upgrade Main board structure The product may differ from the picture depending on the model and selected specifications. • The installed cooling fan may differ by model. • You may not be able to expand from some SATA ports because of the computer's structure. • Only PCI Express x16 graphics cards can be installed in the PCI Express x16 card slot, and AGP graphics cards cannot be installed. • When a PCI Express x16 graphics card is installed, use of the PCI Express x1 card slot may be limited. • Memory socket Main power connector Serial drive connector..

Be careful not to cut your hand on the bracket edges. - Page 70

70 Chapter 3. Settings and Upgrade Adding cards Check that there are slots which can be used for expansion and then check that the card you want to install is compatible with your computer. 1 Remove the bracket from the slot you wish to use for installation. Insert a Phillips (cross-shaped) screwdriver into the slot and tilt it toward the outside, then shake from side to side to detach the bracket. Be careful not to cut your hand on the bracket edges. 2 Open the computer cover. 3 Remove the screw holding the bracket. 4 Insert the card in the slot and push so it is completely inserted. If th..

(for 400T7A/400T7B models only) - Page 71

71 Chapter 3. Settings and Upgrade Adding cards 5 Fix the card in place with the screws you removed. 6 Connect the necessary internal cables according to the manual for the card you purchased. 7 Close the cover and connect external cables, including the power cable. 8 Turn on the computer and refer to the manual for the card you purchased separately to install necessary drivers and programs. (for 400T7A/400T7B models only)

..

(for 400S7A/400S7B models only) - Page 72

72 Chapter 3. Settings and Upgrade Check that there are slots which can be used for expansion and then check that the card you want to install is compatible with your computer. Low profile cards (cards of lower height) can be installed in • this computer. The computer’s form and interior structure may differ • depending on selected specifications. 1 Remove the bracket from the slot you wish to use for installation. Insert a Phillips (cross-shaped) screwdriver into the slot and tilt it toward the outside, then shake from side to side to detach the bracket. Be careful not to cut your..

(for 400S7A/400S7B models only) - Page 73

73 Chapter 3. Settings and Upgrade 5 Fix the card in place with the screws you removed. 6 Connect the necessary internal cables according to the manual for the card you purchased. 7 Close the cover and connect external cables, including the power cable. 8 Turn on the computer and refer to the manual for the card you purchased separately to install necessary drivers and programs. Adding cards (for 400S7A/400S7B models only)

..

Adding memory - Page 74

74 Chapter 3. Settings and Upgrade Adding memory Check that there is a memory socket to be used for expansion on the main board and then prepare memory that can be used in your computer. DDR4 memory is installed on this computer. To add a memory, you need to add the same kind of DDR4 memory. 1 Lie the computer on its side and open the cover. 2 Push the clips on both sides of an empty memory socket. 3 Insert the memory in the direction of the socket and slot and push until it is completely installed. Socket 1 Socket 2 4 Set up the clips to hold the memory in place. When removing memory, push..

(for 400T7A/400T7B models only) - Page 75

75 Chapter 3. Settings and Upgrade Adding the hard drive (HDD) Parallel (IDE) hard drive connections are not available on this computer’s main board, so you cannot use parallel (IDE) hard drives with it. 1 Lie the computer on its side and open the cover. 2 Remove the two screws securing the hard drive bracket. 3 Slide the hard drive bracket in the direction of arrow  and pull it in the direction of arrow  .   4 Remove power cables or signal cables connecting the current hard drive. Power cable Power cable latch Signal cable Signal cable latch The picture above is upside down t..

(for 400T7A/400T7B models only) - Page 76

76 Chapter 3. Settings and Upgrade 5 Insert the new hard drive and secure it with four screws. 6 Connect the power cable and signal cable to the hard drive and then install the hard drive case in the computer. Connect this to the existing hard drive. Power cable Connect this to the new hard drive. Signal cable 7 Connect the other end of the new hard drive’s signal cable to the main board’s SATA 2 port. The hard drive supporting SATA 3.0 should be connected to the SATA1 port to operate it with the SATA 3.0 feature. SATA2 port (second port ) (Connect this to the new hard drive.) SATA1 por..

(for 400S7A/400S7B models only) - Page 77

77 Chapter 3. Settings and Upgrade Adding the hard drive (HDD) Parallel (IDE) hard drive connections are not available on this computer's main board, so you cannot use parallel (IDE) hard drives with it. 1 Lie the computer on its side and open the cover. 2 Remove the computer's front cover. 3 Remove the CD drive bracket screws. 4 Pull and lift the CD bracket as in the picture to tilt it upward. 5 Remove the screw securing the hard drive bracket and then push the hard drive bracket as shown below to detach it. (for 400S7A/400S7B models only)

..

(for 400S7A/400S7B models only) - Page 78

78 Chapter 3. Settings and Upgrade 6 Remove power cables or signal cables connecting the current hard drive. Power cable Power cable latch Signal cable Signal cable latch The picture above shows the cable locations on a detached hard drive case. When disconnecting the power cable and signal cable, be sure to push each latch to remove. The connection ports may be damaged if this is not done. 7 Insert the new hard drive and secure it with four screws. 8 Connect the power cable and signal cable to the hard drive and then install the hard drive case in the computer. Connect this to the existing..

(for 400S7A/400S7B models only) - Page 79

79 Chapter 3. Settings and Upgrade 9 Connect the other end of the new hard drive’s signal cable to the main board’s SATA 2 port. The hard drive supporting SATA 3.0 should be connected to the SATA1 port to operate it with the SATA 3.0 feature. SATA2 port (second port) (Connect this to the new hard drive.) SATA1 port (first port) (Connect this to the existing hard drive.) Users should additionally purchase the necessary • connection cables. The product may differ from the picture depending on the • model and selected specifications. 10 Fix the hard drive case in place with the scre..

(for 400T7A/400T7B models only) - Page 80

80 Chapter 3. Settings and Upgrade Exchanging the CD drive (ODD) The computer can be replaced with the series (SATA) type drive. Parallel (IDE) drive connectors are not available on this computer’s main board, so you cannot use parallel (IDE) drives with it. You can add an additional CD, CD-RW, DVD-ROM, ZIP, or DVD-RW drive with the CD drive expansion space. 1 Lie the computer on its side and open the cover, then remove the computer’s front cover. 2 Remove the CD drive screws and replace the CD drive with a new CD drive. The locations of the screws may differ in drives from other manuf..

(for 400T7A/400T7B models only) - Page 81

81 Chapter 3. Settings and Upgrade Exchanging the CD drive (ODD) (for 400T7A/400T7B models only) 3 Connect the power and the signal cables to the new CD drive. Signal cable Power cable The picture above displays a computer without the CD drive bracket, and should be used as a reference only. 4 Reassemble the front cover and correctly close the computer cover. 5 Refer to the manual for the CD drive you purchased to set it up as necessary.

..

(for 400S7A/400S7B models only) - Page 82

82 Chapter 3. Settings and Upgrade Exchanging the CD drive (ODD) Only CD drives of the correct type for this model can be • used. Please ask a service center about types of CD drives that can be used. Parallel (IDE) drive connectors are not available on this • computer's main board, so you cannot use parallel (IDE) drives with it. 1 Lie the computer on its side and open the cover. 2 Remove the 2 screws holding the CD drive bracket. 3 Gently push the CD drive bracket inward  and then lift upward  to remove. Remove the power cable and signal cable while it is in that position.  ..

(for 400S7A/400S7B models only) - Page 83

83 Chapter 3. Settings and Upgrade 4 Remove the 4 screws holding the lower bracket and then remove the CD drive. Put in the new CD drive. The locations of the screws may differ in drives from other manufacturers. Please inquire at a service center if you have problems adding drives from other manufacturers. 5 Connect the power/signal cables to the CD drive and reassemble the CD drive bracket in the opposite order as you disassembled it, then screw in the 2 screws. Be careful to arrange cables so they do not become caught under the CD drive bracket. You cannot close the cover if cables are ..

Exchanging the CPU - Page 84

84 Chapter 3. Settings and Upgrade Exchanging the CPU If you are not comfortable doing the replacement yourself, • please contact a service center for support. However, there is a cost for services related to expansion even during the free service period. The outside of the CPU cooling fan may differ from the • picture depending on the model, but the replacement method is the same as in these instructions. Separating the CPU The heat sink and CPU are stuck together with heat transfer material. If they are carelessly separated, the CPU may be damaged. Run the computer and wait until the..

Exchanging the CPU - Page 85

85 Chapter 3. Settings and Upgrade 4  Push the CPU lever out slightly to remove and then  tilt the bracket upward and take out the CPU. CPU lever Bracket   Be careful not to touch the pins inside the socket. If the pins are damaged, the CPU cannot be installed. 5 Put in the new CPU. When inserting the CPU, you must make sure the socket and CPU pin locations match. Insert the socket and CPU according to the mark. 6 Lower the bracket and then push the CPU lever downward until it locks in place. CPU lever 7 Put the cooling fan in the correct direction and then screw in the 4 screws..

Exchanging the CMOS battery - Page 86

86 Chapter 3. Settings and Upgrade Exchanging the CMOS battery The CMOS battery on the main board stores setup (CMOS) information while the power is off. Because the CMOS battery is an expendable part, it may need to be exchanged for a new battery if a "CMOS Checksum error" message appears while the computer is on. 1 Open the computer cover. 2 If the CMOS battery socket is Type A Press the latch holding in the CMOS battery and remove the battery, then insert the new battery. If the CMOS battery socket is Type B Press one edge of the CMOS battery with a finger and remove the battery, then ..

Samsung Recovery Solution (Optional) - Page 87

Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 88

..

Backs up drive C or required folders and files. - Page 88

88 Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer. If the computer fails to boot up, you can restore the computer by pressing the F4 key in the booting screen. Samsung Recovery Solution may not be provided or the • version may differ depending on the model. In addition, some functions may not be provided or may differ depending on the version. For more information on using Samsung Recovery Solution, please refer to the online help ..

For computers supporting the touch screen function, the - Page 89

89 Chapter 4. Backup / Restore Restore Function Not only can you use Samsung Recovery Solution when Windows is running, but also when you are unable to boot up into Windows. Let’s learn how to use Samsung Recovery Solution. Optional functions such as Initial State Image, Initial Status Backup, and Partitioning are only available in some models. If the image of the initial state is saved on a DVD or removable storage device, connect the DVD drive or removable storage device to the computer before using the function. Restoring the computer Restore is a function that enables restoring the co..

Samsung Recovery Solution - Page 90

90 Chapter 4. Backup / Restore 2 If the initial menu screen appears, click Restore . If you click Select by Symptom , the Select by Symptom menu appears. If you select a symptom, a recommended restoration option will blink. Click the restoration option to continue. 3 Select either Basic Restore or Complete Restore from the Restore menu. To restore the computer to the initial state, click Computer Initial State and perform the restoration process according to the instructions that appear on the screen. Run Complete Restore if the computer does not work even after Basic Restore has been compl..

Samsung Recovery Solution - Page 91

91 Chapter 4. Backup / Restore In the Advanced menu, you can change the size of the hard drive partitions (e.g. C: and D:). Make sure to backup your data in advance, as all data will • be deleted after the partition size is changed. The • Advanced menu is only activated when the computer boots up in the restoration area. (by pressing the F4 key during the booting sequence.) Since a Complete Restore deletes all user data as well as additionally installed programs, please backup your important data first using the Data Backup function, before running Complete Restore. 4 The computer boot..

Samsung Recovery Solution - Page 92

92 Chapter 4. Backup / Restore Select Drive D. Select the DVD drive. 3 When the option selection item appears, select an option and click Next . The LiveImaging function is supported as options for the Complete Backup operation. The LiveImaging function performs the Complete Backup operation while Windows is running. The backup operation using LiveImaging may slow down if the hard disk drive is accessed frequently by other applications. 4 When the system restarts in Restoration Mode, the Complete Backup operation begins. Continue with the backup by following the instructions. Samsung Recove..

Samsung Recovery Solution - Page 93

93 Chapter 4. Backup / Restore Complete Restore 1 – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. If there are multiple backup DVDs, insert the first DVD. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. 2 When the Samsung Recovery Solution start screen appears, click Restore and then click Complete Restore . 3 Select a Complete Backup restoration point in the restoration point selection screen and click the Next button. The system is restarted. 4 T..

SamsungRecovery\SamsungData - Page 94

94 Chapter 4. Backup / Restore Data Backup/Restore The Data Backup function enables you to backup specific files and folders to another drive, DVD or removable storage device. Data Restore enables you to restore data using the data saved by a Data Backup when data is lost. This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD. Data Backup 1 When the Samsung Recovery Solution start screen appears, click Backup and then click Data Backup . 2 In the data selection screen, select either Basic Selection or Select from all , select a folder..

Deleting the Samsung Recovery Solution - Page 95

95 Chapter 4. Backup / Restore Data Restore 1 – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. 2 When the initial menu screen appears, click Restore and then click Data Restore . 3 Select a backup item to be restored in the backup list and click the Next button. 4 Select a folder for the restoration and click the Next button. Data Restore begins. 5 When Data Restore is completed, check if the data has b..

Recovery Solution Representation (Optional) - Page 96

96 Chapter 4. Backup / Restore Recovery Solution Representation (Optional) What is a Recovery Area? Samsung computers have an additional partition to recover • computers or save backup files. (Only for models with the Samsung Recovery Solution.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs. Launch Start button ( • ) > All Programs > Samsung > Samsung Recovery Solution or press the F4 key while booting the computer to enter the Recovery Area. Then you can back up the present computer state or recover..

Chapter 5. - Page 97

Chapter 5. Appendix Important Safety Information 98 Replacement Parts and Accessories 100 Regulatory Compliance Statements 102 WEEE Symbol Information 110 Samsung Packaging Take-Back Program 111 Product Specifications 112 Glossary 114

..

Always follow these instructions to help guard against - Page 98

98 Chapter 5. Appendix Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system. Setting Up your System Read and follow all instructions marked on the product and in • the documentation before you operate your system. Retain all safety and operating instructions for futur..

Important Safety Information - Page 99

99 Chapter 5. Appendix Care During Use Do not walk on the power cord or allow anything to rest on it. • Do not spill anything on the system. The best way to avoid • spills is to not eat or drink near your system. Some products have a replaceable CMOS battery on the • system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer. Dispose of batteries according to the manufacturers instructions. If the CMOS battery requires replacement insure that a qualified technician perf..

Replacement Parts and Accessories - Page 100

100 Chapter 5. Appendix Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. Battery Disposal Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteri..

Do not unplug the power cord by pulling the cable only. - Page 101

101 Chapter 5. Appendix Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requireme..

Regulatory Compliance Statements - Page 102

102 Chapter 5. Appendix Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in..

USA and Canada Safety Requirements and Notices - Page 103

103 Chapter 5. Appendix Regulatory Compliance Statements Wireless devices are not user serviceable. Do not modify • them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which • the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not..

Safety Notices for Other Devices in the Wireless Network: - Page 104

104 Chapter 5. Appendix Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Intel co..

Intentional emitter per FCC Part 15 - Page 105

105 Chapter 5. Appendix If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded d..

Exposure to Radio Frequency (RF) Signals - Page 106

106 Chapter 5. Appendix Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information This product can contain an embedded radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Council on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both..

Unintentional Emitter per ICES-003 - Page 107

107 Chapter 5. Appendix Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Intentional Emitter per RSS 210 This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.” The term “IC” before the equipment certi..

Regulatory Compliance Statements - Page 108

108 Chapter 5. Appendix Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. To prevent radio interference to licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Wireless devices are not user serviceable. Do not modify them in any way. Modific..

Regulatory Compliance Statements - Page 109

109 Chapter 5. Appendix Manufacturer Information Samsung Electronics Co., Ltd. 129, Samsung-Ro, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, 443-742, Korea Samsung Electronics Suzhou Computer Co., Ltd. No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province, 215021, China Tel: +86-0512-6253-8988 Samsung Electronics Vietnam Co., Ltd. Yen Phong 1, I.P Yen Trung Commune, Yen Phong Dist., Bac Ninh Province, Vietnam For the web or the phone number of Samsung Service Centre, see the Warranty or contact the retailer where you purchased your product. RTC CAUTION CAUTION : Danger of explosion if ..

Correct disposal of this product - Page 110

110 Chapter 5. Appendix WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly..

Samsung Packaging Take-Back Program - Page 111

111 Chapter 5. Appendix In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278-0799 Samsung Packaging Take-Back Program

..

[ 400T7A / 400S7A / 400T7B / 400S7B ] - Page 112

112 Chapter 5. Appendix The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. [ 400T7A / 400S7A / 400T7B / 400S7B ] Operating Environment Temperature: 10~35 °C Humidity: 10~85 % RH Operating Voltage 400T7A / 400T7B: 350 Watt / 450 Watt 400S7A / 400S7B: 270 Watt Frequency 50/60 Hz or 50-60 Hz Input voltage AC200-240 V (for 220) or AC100-240 V Input current 400T7A / 400T7B: 4.5 A, 6.0 A or 6.5 A 400S7A / 400S7B: 4.0 A or 4.5 A Output voltage ±12 V, +5 V + 3.3 V, +5 VSB Optional components may not be provi..

Product Specifications - Page 113

113 Chapter 5. Appendix Product Specifications Trademarks Samsung and the Samsung logo are trademarks or registered trademarks of Samsung Electronics. Intel, Pentium®, and Core™ are trademarks or registered trademarks of the Intel Corporation. Microsoft, MS-DOS, Vista, XP, and Windows are trademarks or registered trademarks of the Microsoft Corporation. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide. Wi-Fi®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi CERTIFIED™, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. HDMI, the HDMI logo, and ..

Chapter 5. - Page 114

114 Chapter 5. Appendix Glossary The Glossary lists the terminologies used in this User Manual. For terminologies other than these, look in Windows Help. Backup A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. Chargeable USB This program enables supplying power to a specific USB port when the system is in power saving mode, hibernation mode or off. Client This refers to a computer that uses a shared network resource provided by a server. DDR SDRAM (Double Data Rate Synchronous Dynamic Random A..

(Digital Versatile Disk) - Page 115

115 Chapter 5. Appendix DVD (Digital Versatile Disk) DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. HDMI This is a digital video / audio interface specification that transmits ..

(Secure Digital High Capacity) - Page 116

116 Chapter 5. Appendix Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Notification Area This refers to the right area of the Taskbar including program icons such as the volume control, the power options and the time. Partition This refers to the act or practice of dividing the storage space of a hard disk drive into separate dat..

(Universal Serial Bus) - Page 117

117 Chapter 5. Appendix System File System Files refer to files that are read and used by the Windows operating system. In general, system files must not be deleted or moved. TCP/IPv4 This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. The data transmission specifications are one of the interface standards used to connect a computer to peripheral devices. T..

Sponsored links

Latest Update